4O3A Signature · Manufacturer Authorized North American Service Center

The North American service bench for 4O3A Signature gear.

N7HQ Labs is the Manufacturer Authorized North American Service Center for 4O3A Signature products - Power Genius XL amplifiers, the Genius automation family, antenna switches, and band-pass filters. Every unit gets an engineering-level evaluation: an experienced RF engineer, an automated calibrated bench, AI-assisted analysis - and open-book pricing so you always know what you're paying for.

4O3AManufacturer authorized
Engineer-ledAI-assisted evaluation
HF specialistsVHF/UHF welcome too
1.25×Open-book parts markup
4O3A Signature service

Manufacturer authorized repair for the full 4O3A product line

As the Manufacturer Authorized North American Service Center, we service 4O3A Signature gear to the manufacturer's own standards - diagnosed on calibrated RF equipment and documented with a clear estimate before any work begins.

Power Genius XL Amplifier

Service for the legal-limit SO2R amplifier - no/low output, LDMOS and PA-stage faults, protection and fault conditions, fan and control issues, and firmware-related problems.

Diagnostic-first · $95 diagnostic fee

Antenna Switches

Antenna Genius (8x2 / 8x1), 8xAB, and high-power outdoor switches - relay, isolation, RF path, control-board, and network/connectivity faults.

Per-unit estimate

Genius Automation Family

Station Genius, Rotator Genius, Interface Genius, and Antenna Genius controllers - power, control, port, and connectivity issues for local and remote operation.

Per-unit estimate

XL Series Band-Pass Filters

High-power 160-6m band-pass filters - insertion loss, out-of-band rejection, connector and relay faults, and fan-cooling service to keep them at rated 4,500W PEP.

Per-unit estimate

Diagnostics

Not sure what's wrong with your 4O3A unit? Send it in for diagnosis. You get a written diagnosis and an itemized estimate before we proceed.

Diagnostic fee $95, credited in full against an approved repair

General RF Repair

Beyond 4O3A, we also take on HF amplifier, tuner, and power-supply repair - diagnosed and verified on the same RF bench.

By arrangement · per-unit estimate

Full service details & pricing →

How it works

A clear path from "it's broken" to "it's back on the air"

Every repair moves through tracked stages, and you get an email at each milestone so there are no surprises.

Submit a request

Tell us the make, model, serial, and symptoms. Your RMA number comes back instantly.

Ship it in

Once we accept the request, we send packing & shipping instructions to protect your gear.

Diagnose & estimate

We evaluate on the bench and send a written, open-book estimate for your approval.

Repair & return

We fix, test, and ship it back - with status updates the whole way through.

Why N7HQ Labs

The most qualified 4O3A bench outside 4O3A itself

The only 4O3A service center in North America authorized by the manufacturer, led by an experienced RF engineer - that combination is the substance behind the claim.

  • Manufacturer Authorized North American Service Center. Authorized directly by 4O3A Signature, the maker of the products we service - no shipping units back across the Atlantic.
  • Engineering-level diagnosis. Your unit is evaluated by an experienced RF engineer - the same discipline that builds and supports this class of equipment - not board-swapped by guesswork.
  • AI-assisted evaluation, engineer-verified. AI helps analyze every bench measurement and flag anomalies against your unit's history - and the engineer reviews and signs off on every result.
  • Proper RF test equipment. Power meters, dummy loads, and signal sources - your gear is verified under real load, not guessed at.
  • Open-book parts pricing. Parts are billed at a transparent, published formula. No mystery markups.
  • Status you can actually track. Log in any time to see exactly where your unit is in the repair queue.
Open-book parts pricing
Parts cost + inbound shippingcost
Standard markup× 1.25
Applicable tariffs / duties+ at cost
Labor$150/hr bench rate
Licensed hams$25/hr off → $125/hr
Shipping we buy for youat cost + 10%
Texas sales taxwhere it applies
Diagnostic fee$95, credited in full against an approved repair
Warranty on our work90 days from our ship date, parts and labor

You see the same parts math we do. Example: a $40 part with $6 shipping bills at ($46 × 1.25) = $57.50, plus any tariff at cost. The ham discount applies to hourly bench labor (not flat-rate repairs). The $95 diagnostic fee is credited in full against an approved repair.

Testimonials

What operators say about the bench

Their words, with their permission, from hams whose 4O3A gear has come across our bench.

Dan Quigley has great knowledge and expertise about the PGXL RF amplifier system. He provided excellent support to get my PGXL back on the air quickly. Dan knows this product inside-out and his workmanship is top notch! Dan is also easy to communicate with regarding the status of repairs. I highly recommend N7HQ Labs for PGXL support.

de Geoff Mendenhall · W8GNMPGXL

From the get-go, I was kept fully informed as to the status of the repair process on a regular basis. The repair was completed expeditiously and a full description of what was done, along with all of the test results was provided. … I have no hesitation in recommending Dan and his service organization. Not only is he well equipped with current technology test equipment and test software, but he has extensive knowledge of the products. All of this together results in outstanding service.

de Neil King · VA7DXPGXL

Thanks for your personal attention to the repair of my PGXL. It is back on-the-air, like new again, thanks to your professional repair service. Absolutely top-notch repair to match this fine amplifier.

de Dale · W5OGPGXL

N7HQ did a wonderful job fixing my PGXL. … The communication between my shack and the lab was great. Dan has thought of everything in his own professionally constructed app. … He will actually chat with you on the telephone if needed. The amp works like new now. It was the best experience I have had yet with a repair.

de Doug Vernier · K0DVPGXL

I talked to Dan at N7HQ Labs and I came away with the feeling that this guy really cared about my thoughts and concerns. Dan was upfront with me on all the costs I might incur. … Dan’s pricing was quoted to me before I made any commitment on repairs. … I could not be more impressed with the wait time or service. I would highly recommend this company to service all your [4O3A] products.

de Jeff Oberg · KB8SXKAntenna Genius

Had work done here? Tell us how it went →

Ready to get your gear back on the air?

Open a repair ticket or ask us a question - we typically reply within one business day.