Shop notes · November 9, 2026

Inside the Lab

A customer asked: “What does the lab look like?” Here is the answer, in two photos taken seconds apart on a Monday evening. Forgive our mess.

Bench 1

A Tuner Genius XL on the bench

The lab has two electronics benches. This is Bench 1, and this evening it is working on a Tuner Genius XL: the unit in the foreground with its cover off. Around it is what a bench like this runs on. Supplies overhead, instruments on the shelf, and coax going everywhere it needs to. The Icom IC-9700 in the rack at left lets us keep tabs on what is happening locally.

Bench 1, one of two electronics benches: a steel-topped bench. A Tuner Genius XL sits in the foreground with its cover off. Behind it, a shelf of test instruments with lit screens, two bench power supplies above, an Icom IC-9700 and a second transceiver in the rack at left, and coax leads across the bench top.
Bench 1, one of the lab's two electronics benches, with a Tuner Genius XL open in the foreground.
The work bench

On deck

The work bench is where disassembly and assembly happen. It holds the units that have already been estimated and are ready for their service work. On deck this evening: Power Genius XL amplifiers, an Antenna Genius and a high-power band pass filter. Also on the bench is a refurbished Power Genius XL PA module, ready for its new home. Behind the units is part of our rework station.

The work bench: Power Genius XL amplifier chassis standing in a row, a high-power band pass filter marked 20 in the foreground beside a circuit board with a row of coax connectors, a refurbished Power Genius XL PA module with two fans at lower left, and part of the rework station on the bench behind them.
On deck: Power Genius XL amplifiers, an Antenna Genius and a band pass filter, estimated and ready for their service work. At lower left, the refurbished PA module. Behind them, part of the rework station.

Something for the bench?

Tell us what it is, and what it is doing.